Upon unpacking the RP-330, you'll want to charge the 18V lithium ion battery. The #27958 Battery Charger
will charge an 18V 2.2Ah battery in 60 to 70 minutes. The charger will do a 1 second self test upon plug in, then both
LEDs will go off. While charging the battery, the green LED will blink. A red LED indicates too hot a pack. Once
the pack is charged the green LED will glow constantly. Battery can remain on charger without fear of over-
charging.
Once the battery has charged, install it onto the RP-330. Next, select the appropriate jaw set. Pull back the attachment
mounting pin (right image) so you can load the jaw set into the barrel slot. The idea here is to line up the mounting pin
with the hole(between the jaw arms)on the jaw set.